Free PCB Cost Calculator: Instant Online PCB Quote

Get a free instant PCB quote: set size, layers, material, copper and finish and the price per board updates as you type, with no email needed. The formula and rate tables are below.

  • 100% free to use
  • No signup required
  • No payment details

Drop your Gerber ZIP here

Import board dimensions, then review your specs

Gerber ZIP · up to 10 MB · read in your browser·Sample file
Or enter board specs
mm
mm
pcs
More board optionsFR-4 Standard TG130-140 · 1.6 mm · 1 oz · HASL (with lead)

Check these defaults for your board. Material, thickness, copper and finish are not read from the Gerber outline.

Solder Mask Color

Purple mask adds a surcharge in this model; the other colours are priced the same.

The estimate updates as you change specs

Free to estimate. Clear about costs.

Get a free instant PCB quote in three steps

1. Configure your board

Enter width and height in millimetres and the number of boards, then pick layers, base material, thickness, copper weight, surface finish and solder mask colour. The price updates instantly with every change; there is no Calculate button, no sign-up and no email required.

2. Optimise and compare

Read the cost breakdown (setup, material, fabrication, finish) and the price per board. Switch layer count, material or quantity to see which choice moves the price, and use the tables below to compare options side by side.

3. Send your files for the exact price

When the budget looks right, click Get a Free Quote under the price. The form sends your calculator settings by email and lets you attach Gerber files (and, for assembly, the BOM and pick-and-place file). Requesting a quote is free and nothing is ordered or charged. The exact price comes back by email after your files are reviewed.

PCB board specifications you can price online

Options built into the free standard PCB calculator.
SpecificationOptions in the calculatorEffect on the instant quote
Board sizeWidth × height in mmPrice follows total order area (board area × quantity)
Quantity5 boards and up (orders under 5 are priced as 5)Minimum order charge spread over the boards
Layers1, 2, 4, 6, 8, 10, 12, 16Separate PCBWay-calibrated price curve per layer count
Base materialFR-4 standard, FR-4 high Tg (TG170), aluminium core, RogersHigh Tg and aluminium calibrated; Rogers is a planning factor
Thickness0.4–2.4 mm0.6–1.2 mm slightly cheaper, 0.4, 2.0 and 2.4 mm add a surcharge
Copper weight1 oz, 2 oz, 3 oz2 oz and 3 oz add a surcharge that grows with order area
Surface finishHASL, lead-free HASL, OSP, immersion silver, ENIGSurcharge over HASL with lead
Solder mask colourGreen, red, yellow, blue, white, black, purpleSame price except purple

Special processes priced only in a real quote

Impedance control, blind or buried vias, via-in-pad, castellated holes, edge plating, minimum trace and space and drill density are not options in the online calculator. Mention them when you request a quote so they are priced from your files.

How the instant PCB quote is calculated

The standard PCB price is built from about 230 quotes we collected from PCBWay’s public online quote form on 2026-11-03, then checked against 30 fresh ones.

  • Base price: a price curve for each layer count, read at your total order area (board area × quantity, with a minimum of 12 cm² per board), with a small correction for board size at the same area. Orders under 5 boards are priced as 5.
  • Option surcharges: thickness, copper weight, high Tg, surface finish and purple solder mask each add a fixed amount measured on a 100 × 100 mm board at 10, 100 and 1,000 pieces, scaled to your order area.
  • Prototype offers: the $5 two-layer offer and the fixed small-run prices for 2- and 4-layer boards up to 100 × 100 mm are applied the way the quote form applies them.
  • Breakdown: setup is the minimum order charge for that layer count, fabrication is the rest of the base price, material holds thickness, copper and high-Tg surcharges, and finish holds the surface finish and colour surcharge. The split is approximate; the total is what was calibrated.

How close it is to PCBWay’s live quote

On 2026-11-03 we quoted 30 random configurations (1 to 8 layers, 20 to 250 mm, 5 to 2,000 boards, mixed finishes, thickness, copper and colour) that were not used to build the model. Median gap: 6.9%. Within 15%: 19 of 30. Within 25%: 25 of 30. The largest gaps were 1-layer boards with 2 oz copper, 6-layer boards with 2 oz copper or 2.0 mm thickness, high Tg on 5-piece runs, and very small boards ordered by the thousand. Rogers uses a ×3.5 planning factor on the FR-4 price and is not calibrated.

Every number here comes from this calculator. The standard PCB prices are calibrated to PCBWay’s public online quote form (checked 2026-11-03); this site is not affiliated with PCBWay, and live prices change, so confirm with a real quote before ordering.

PCB price per board at every quantity

Same 100 × 100 mm board, 1.6 mm FR-4, 1 oz copper, run through the calculator at each quantity. The last column switches to 4 layers with ENIG.

Quantity table from this site’s PCB formula (run 2026-11-03); USD, bare boards, shipping not included.
Quantity2-layer HASL, per board2-layer HASL, order total4-layer ENIG, per board
5$1.00$5.00$12.34
10$0.50$5.00$8.54
25$2.51$62.71$6.33
50$1.95$97.44$4.23
100$1.52$151.81$2.78
250$1.27$318.36$2.57
500$1.14$568.27$2.13
1000$1.06$1056.57$1.95

At 5 and 10 boards the 2-layer column shows PCBWay’s $5 prototype offer. Above that, the per-board price falls quickly because the minimum order charge is spread over more boards, then flattens once the order is priced mainly by area.

Price comparison by layer count and quantity

Layer × quantity matrix, 100 × 100 mm, 1.6 mm FR-4, 1 oz copper, HASL (run 2026-11-03); USD per board.
LayersAt 10 pcsAt 100 pcsAt 1,000 pcs
1-layer$7.53$1.54$0.84
2-layer$0.50$1.52$1.06
4-layer$5.44$2.40$1.62
6-layer$17.88$3.73$2.07
8-layer$23.50$4.64$2.80
10-layer$28.60$6.16$3.75
12-layer$91.13$20.50$10.35
16-layer$133.91$35.46$20.06

What drives PCB cost: material and finish rates

Order surcharge for one option change on a 2-layer 100 × 100 mm board (run 2026-11-03); USD per order, compared with 1.6 mm FR-4, 1 oz, HASL with lead, green. Negative means cheaper.
OptionAt 20 pcsAt 100 pcsAt 1,000 pcs
Lead-free HASL+$2.36+$5.84+$49.33
OSP+$24.38+$21.11+$0.00
ENIG+$33.04+$37.85+$326.90
Immersion silver+$53.46+$49.02+$229.52
High Tg (TG170)+$61.81+$56.91+$228.47
2 oz copper+$185.20+$264.20+$1469.32
1.0 mm thickness−$3.66−$12.17−$98.47
2.0 mm thickness+$64.69+$64.12+$289.33
Purple solder mask+$23.02+$16.20+$20.56

Layer count is the other big lever: in the instant quote a hundred 100 × 100 mm boards cost about 1.6× as much at 4 layers as at 2 layers. See the price by layer count table.

Ways to lower your PCB quote

  • Shrink the board outline: material and fabrication both scale with area.
  • Use the fewest layers that route cleanly; going from 4 to 2 layers removes the largest single cost step.
  • Stay on standard FR-4, 1.6 mm and 1 oz copper unless the design needs otherwise.
  • Choose HASL or OSP when you do not need ENIG’s flat pads (fine-pitch BGAs, gold fingers, wire bonding).
  • Order enough boards to spread the setup cost; the quantity table shows where the curve flattens.

What the instant PCB quote leaves out: shipping, lead time, special processes

The instant quote covers the bare boards only. Shipping, import duties and taxes, lead time, components, electrical testing and the special processes listed above are not in the online price. They depend on your destination, files and schedule, so they are given in the exact quote you receive by email.

Other free calculators: flex PCB and PCB assembly

Free to use: no account, no email, no order

The calculators are free to use with no account and no email address needed to see a price. Everything runs in your browser, so the price appears the moment you change a setting. You only share contact details if you choose to request an exact quote, and that request is free too. The formula and every rate are published on this page so you can check how each number is made. Who runs the calculator.

Free instant PCB quote FAQ

Is this PCB quote calculator really free?

Yes. Every calculator on the site is free, needs no account and shows the price without asking for an email address. Requesting an exact quote is also free; nothing is ordered or charged.

How instant is the online PCB quote?

The price is recalculated in your browser every time you change a setting, so it appears immediately. There is no waiting for a sales reply to see a budget figure. The exact quote for your files comes back by email.

Is the instant quote the final price?

No. The standard PCB price is calibrated to PCBWay’s public online quote form, so for common FR-4 boards it lands close to what that form shows: in a fresh check of 30 random boards the median gap was 6.9%. It still cannot see your drill count, trace and space or panel utilisation, and live prices move, so use it to set a budget and confirm with a quote from your Gerber files.

Why is the price per board so much higher at small quantities?

Small orders pay a minimum order charge that does not shrink with the board count. Ten 100 × 100 mm 4-layer boards cost $54.39 in total, while 1,000 of them cost $1.62 each. The quantity table above shows where the curve flattens.

Why does a small 2-layer order show $5?

PCBWay’s online form offers 5 or 10 two-layer FR-4 boards up to 100 × 100 mm for $5 with standard options (HASL with lead, 1 oz copper, 0.6–1.6 mm, any colour except purple; lead-free HASL only at 5 boards). The calculator applies the same rule, so those orders show $5 in total. Change the size, quantity or an option and the regular price returns.

How close is the estimate to PCBWay’s own quote?

On 2026-11-03 we quoted 30 random board configurations on PCBWay’s online form that were not used to build the model. The median gap was 6.9%, 19 of 30 were within 15% and 25 within 25%. The biggest gaps were 1-layer boards with 2 oz copper, 6-layer boards with thick copper or 2.0 mm thickness, high-Tg on tiny prototype runs, and very small boards ordered by the thousand. Rogers and flex material use planning factors and are not calibrated.

What is included in the estimate?

Bare-board fabrication for the options on the form: board size, quantity, layers, material, thickness, copper weight, surface finish and solder mask colour. Shipping, import duties, build time upgrades, special processes (impedance control, blind or buried vias, via-in-pad) and assembly are not included. Use the assembly calculator for SMT and through-hole work.

What happens when I click “Get a Free Quote”?

The form sends your board settings and contact details to the site operator by email. Nothing is ordered or charged. You get a reply by email; attach or offer your Gerber files so the quote can reflect the real design.

Can I change the currency?

Yes. Use the currency selector above the results. Conversion uses fixed rates built into the page, so treat non-USD figures as approximate.